Kailh Silent Microswitch (2-pack)

2x Kailh silent 2-pin microswitch. Comes in 4.3mm (yellow) and 7.3mm (red) height options. These are the quietest switches that we offer. To replace standard 3-pin switches, you will need the 7.3H switches (red plunger).

Please note - These switches only have two pins, however, they should still be compatible with most mice. You need to solder these switches in the top two pins and leave the third bottom pin empty. It is fine to leave the third pin empty as it is typically meant for a debounce circuit, but there are pretty much zero mice that actually use it.

Disclaimer - These switches will not fit in ASUS hot swap mice! The width is slightly too wide for them. These are 6.2mm in width, and the ASUS sockets support around 5.8mm. We have seen some users sand down the switch housing very lightly until it fits, but this would be done at your own risk, we don't necessarily recommend it.

Specifications

Size - 6.2*6.2*7.3mm (red) or 6.2*6.2*4.3mm (yellow)

Lifespan - 3M

Operation force - Approximately 70±15gf